KFE Ultra Quiet Advanced Brake Pad Headers

KFE Ultra Quiet Advanced Ceramic Brake Pads are manufactured with better friction materials compared to most OE brakes.  KFE Brake Systems ceramic formula will give the driver the ability to brake harder and faster due a higher consistent coefficient of friction. High coefficient of friction on a consistent basis means that the brake system will be able to sustain a longer high temperature condition without brake fade under deceleration of your vehicle. Not only in extreme braking conditions will the brake pad function at a high level, during “cold” conditions the system will still able to perform on a consistent basis.

Keeping the environment and general public health in mind, all of our brake pads are made from 100% asbestos-free materials. Each brake pad also is treated with the thermo scorched process. This helps eliminate much of the break-in process done by you or professional mechanics. Along with this process, we also implemented the Positive Molding process. This process used by all the OEM manufactures which ensures a more consistent characteristic in the lifespan of the brake pad. Finally, all of our Quiet Comfort OE brake pads come with Wolverine dual-sided rubber reducing shims. The shims have several functions in the brake system. One is to act as a buffer between the piston of the caliper and the back plate of the brake pad keeping it undamaged and extending the life of the brake pad. Secondly, they act as an absorbent to vibration, which will reduce the noise. Finally shims act as a shield against heat transfer. This can help extend the life of your brake fluid and save you more money on future costly repairs.

Want better braking on your vehicle? The KFE Ultra Quiet Advanced Brake Pads has a better formula than OEM semi-metallic compounds. The Ceramic compound will give you a better bite and a more consistent friction of coefficient at a higher temperature!

Other features including slotted and chamfer edged brake pads, which are featured in most but not all brake pads. Slots in the brake pads have two jobs. The first is to help clean the surface of the brake rotor. Secondly, they help gas to escape between the pad and the rotor. By having more contact between your brake pad and rotor disc, the driver will be able to stop their car more effectively. Chamfered edges on brake pads will help reduce noise, and prevent lift of the brake pad. This can help save and extend the life of your brake pad and save you money down the road.

KFE Brake System Ultra Quiet Advanced Brake Pad Chart

KFE Ultra Quiet Advanced Brake Pad Ratings Chart

Key Features:

KFE Brake Systems Ceramic Pad Slotted
Slotted

Debris like dirt, small rocks, or gas between the pad and rotor can cause a slow reaction when you press down on the brake pedal. Slots in the brake pad help clear and clean the surface of these materials and help gas escape faster. This will dramatically improve the responsive time between pedal feel and actual braking. *1

KFE Brake Systems Ceramic Pad Chamfer Edges
Chamfered

One of the key benefits of chamfered edges is that it prevents edge lifting. Edge lifting can be caused by the inconsistency of the brake contact surface. Through time a chip may give pressure to the edge of the pad and cause it to be lifted from the backing plate. This will then result in the continuous lifting of the rest of the friction surface or corrosion of the back plating. With chamfered edges this is scenario is greatly reduced, extending both the life of your brake pad and rotors, but also saving you money in the long run*1

KFE Brake Systems Wolverine Shims
Wolverine Shims

Eliminating brake noise is both Wolverine’s and our top priority. Wolverine Advanced Material’s latest material, manufacturing, and design technology produces one of today’s best weapons to combat against brake noise. The result is having a shim that will absorb more vibrations, and in turn can reduce as much as 20% more noise compared to conventional dual rubber shims.

KFE Brakes Systems Ceramics Pad Top View
Positive Molding

This manufacturing technique used by KFE Brake Systems and all major OE manufacturers ensures pressure and heat applied evenly to the material composition and back plate. This allows an evenly distributed characteristic throughout the brake pad surface. The finished product results in a more predictable brake system with less brake fade.

KFE Brake Systems Scorched Image
Thermo Scorched

This manufacturing process reduces the break in process, enhancing both your driving experience and road safety.  All KFE Brake Pads go through this process which burns off much of the uncured agents. This then stabilizes the friction of coefficient and reduces noise causing agents. Without this process, a break-in or bed-in process is performed by doing several high speed accelerations and decelerations.

1. Please check per your vehicle application, not all applications have slotted and chamfered features.  Designs based on FMIS standards.